Brief:RhS core RH series ferrite core is special customized product,with groove on the surface to put the cable after winding convenient, work frequency also cover 1mhz-1ghz, nizn is the common material.
Brief:Clamp&Snap on core SCRC&SCNF Emi&Emc suppression ferrite clamp split core is a popular products that used for the harness assembly for most of electric appliance,fitted for wire diameter range is 3mm-18mm, the core with clip plastic case for insulation,shape include round and square,The ferrite material is NiZn or MnZn, NiZn working at high frequency 1mhz-1Ghz, MnZn working at low frequency 1khz-500khz, material permeability from 40-15000 with good impedance value.
Brief:Split core SCT&SCH ferrite is a series of split EMI core, commonly used with plastic clamp case covered,it is a main product for the power cable and harness assemble. It is convenient to get the wire through it, and open it.Material is NiZn(Nickel Znic) and MnZn(Manganese Znic),to have good in impedance from 1khz-1ghz.
Brief:Rod core R type ferrite core, is a rod shape Nickel Zinc or Manganese Zinc soft ferrite, commonly used for coils after winding with excellent withstand voltage and current,Rod coil inductor in igniter, carbon brush, audio antenna, wireless antenna widely used.
Brief:POT series MnZn transformer core are commonly used for filters for telecommunication equipment,and various kinds of inductors and transformers etc. It is a polycrystal, sintered material with high electrical resistivity. The high resistance of ferrite makes eddy current losses extremely low at high frequencies.
Brief:DS core DS series MnZn transformer core are commonly used for CATV,LED transformer and various kinds of electronic instruments, etc.Suitable for the planarization of transformers.It has Low Loss and High Frequency.
Brief:ET&FT core ET&FT series MnZn transformer core are commonly used for high current transformer, power switch transformer, common mode choke, high current transformer, etc. It is a polycrystal, sintered material with high electrical resistivity. The high resistance of ferrite makes eddy current losses extremely low at high frequencies.
Brief:UF,UU&UI core UF,UU&UI series MnZn transformer core are commonly used for varieties of switching power supply transformer,coke coils et etc. It is a polycrystal, sintered material with high electrical resistivity. The high resistance of ferrite makes eddy current losses extremely low at high frequencies.
Brief:EI core EI series MnZn transformer core are commonly used for various kinds of transformers , chokes and various kinds of electronic instruments, etc. It has high permeability, low core loss factor
Brief:The amorphous C-type alloy core has the advantages of simple structure, convenient coil assembly, convenient inductance adjustment, etc., The amorphous C-type alloy cores has high magnetic permeability and low iron loss characteristics in the frequency range of 5KHz-20KHz, is widely used as the filter inductor in the inverter circuit of the solar photovoltaic industry.
8000TProductive forces Now has an annual production capacity of 8,000 tons of soft ferrite
360STAFF More than 360 employees, 60 management technicians.
Careful Magnetism & Electron Group is a technically leading corporation, intergrading production, management, research, development and information service. It was established in 2001, with the former of Huzhou Cifeng Industry Corporation -- a key enterprise in Huzhou city. It was assessed as “High and New Technology Enterprise inZhejiangprovince”, has more than 20 experience.
Ferrite bead filters are used by many industries for a variety of purposes. They have the ability to remove large particulates from emissions without adversely affecting other components of the system. They are particularly popular in the medical industry as they can help to remove dangerous biologi
Ferrite Bead Inductance is the way that DC bias current is produced in a DC powered device such as an electric generator. Ferrite is the lightest of the precious metals, yet it is extremely durable and flexible at the same time. It has superior electrical and mechanical properties making it a popula
If you are looking to improve the efficiency of your current electrical feed line choke combination, then you will probably be interested in ferrite bead balun technology. One of the most efficient electrical feed line choke systems currently on the market is the K3MR (Kerdiore) ferrite bead system.
The primary use for ferrite core magnets is in the construction industry. It is not uncommon to see a variety of fasteners, bolts, hinges and knobs that rely on ferries to hold the parts together. Ferrite is an extremely strong magnetic field, which is why it is the material of choice for many const
A new generation ferrite iron core ferrous iron core is now available in the market. It offers numerous benefits over traditional ferrous products. The ferrite iron core is highly demanded for its extreme hardness, superlative corrosion resistance, high temperature resistance, magnetism and magnetic
The toroidal core induction method is a way to produce permanent magnetic field that is a combination of polarity and that is called the Toroidal Coherence. It was first used in 1932 by G. V. Lazarenko, who developed a machine to measure the variation of magnetic field due to the motion of a second
Address:901-905，Liyang Mansion, Huzhou City, Zhejiang Province 313000,China. Tel: 0086-572-2093272 Fax：0086-572-2093252 E-mail：email@example.com