Welcome To Huzhou Careful Magnetism & Electron Group
Home / News / What Are the Uses of an Iron Ferrite Core Wire?
Hot Keywords: Anti-interference core、Transformer core

What Are the Uses of an Iron Ferrite Core Wire?

Views:0     Author:Site Editor     Publish Time: 2020-04-24      Origin:Site

Ferrite cores are ideal to be used in electrical circuits. Since they are used in the construction of certain types of iron rods, they tend to have a light-weight and they are available in different types. However, one has to be careful that the type he or she is going to use is the most appropriate for its intended purpose.


They are composed of thin iron wires whose ends are wrapped with paper-like material that can also serve as an insulation from the magnetic field that it carries. It is used to provide better electrical conductivity to the material that it is wrapped around. The technique that makes this possible is called dielectric breakdown. The result is that the material is not affected by external factors and they are strong enough to withstand any kind of stress that they encounter.


Due to the fact that the thin core wire is far thinner than the one that holds it together, it gives way to very little fluctuations in temperature. This helps it to withstand high-current levels without having the problems of corrosion. When a high voltage source is connected to the iron core, it allows the entire circuit to be insulated from outside elements. This ensures that the device is shielded from the outside world even if it is placed close to the device that generates the electricity.


The process of creating an iron core wire can be performed by using sheets of copper oxide. The creation of such material is not expensive and it is also reusable. However, the plates that hold the two layers of plates together need to be bonded tightly together. A periodic heating and cooling of the components need to be done.


A single iron ferrite core wire is smaller than the combined thickness of the plates of copper oxide. This gives way to greater flexibility, which is useful in electrical applications. The steel core wire that is used in some applications is thicker and more durable than the other types. This is why it is a preferred material in areas that require high voltages.


There are several other types of metals that can be used in these circuits. Aluminum and magnesium are among them. Aluminum and magnesium are less conductive than the type of iron rod that has been wrapped with the paper-like material. The aluminum and magnesium wires are more fragile and more prone to damage due to excess heat.


The ferrite core wires that are usually used for manufacturing automobiles should not be left unattended because they are prone to short circuits due to the electromagnetic waves. Therefore, it is better to keep them on the floor or some flat surface. It is best to use grounding cables so that they are free from the risks of shock. The electrical activity generated from the motors of the cars need to be shielded from external electromagnetic waves.


For those who do not have the knowledge of how they work, they would have thought that the use of these types of wires has brought about some serious health hazards because they are relatively weak magnets. In actuality, it is only the ions in the air that can have such an effect. The main reason for the low voltage functioning of these wires is because they have low currents. The biggest advantage of the iron ferrite core wire is that they do not work at all if they are subjected to external magnetic fields.

Frend links:  Magnet, electroplating power supply
NAVIGATION
ABOUT US
NEWS
ENVIRONMENT
CONTACTUS
CATEGORY
  Amorphous core
  EMI suppression ferrite core
  MnZn transformer Core
Copyright © 2020 Huzhou Careful Magnetism & Electron Group. All rights reserved.