Welcome To Huzhou Careful Magnetism & Electron Group
Home / MnZn transformer core

Products Detailed

The Best products for sale

  • MnZn Pot Ferrite Core
    POT series MnZn transformer core are commonly used for filters for telecommunication equipment,and various kinds of inductors and transformers etc. It is a polycrystal, sintered material with high electrical resistivity. The high resistance of ferrite makes eddy current losses extremely low at high frequencies.
  • Balun Ferrite Fore
    Balun core
    Rid type emi NiZn and MnZn soft balun ferrite core is a common material for balun transformer,also used in round cables of CATV,MATV,IPTV. It can install on the wire directly. Big size Special used in water treatment system.
  • Ferrite Tube EMI Suppression Core
    Tube core
    RH series emi suppression ferrite bead tube core commonly used for round cable for wire winding to get the anti-interference efficiency at high working frequency for application, especially at 1MHZ-500MHZ is the best condition, to fitted cable diameter from 1mm to 20mm.
  • Toroidal Ferrite Ring Core
    Toroid&Ring core
    Emi NiZn(Nickel Zinc) toroidal core ferrites is a very popular component for the electric application, This sintered soft magnetic ring core widely used for power,digital,HDMI cables,filter inductors,RF transformers,the advantage is high working frequency,high impedance to compared with other soft ferrites,that also get good results in Anti-interference.
  • Ferrite Clamp Core
    Clamp&Snap on core
    SCRC&SCNF Emi&Emc suppression ferrite clamp split core is a popular products that used for the harness assembly for most of electric appliance,fitted for wire diameter range is 3mm-18mm, the core with clip plastic case for insulation,shape include round and square,The ferrite material is NiZn or MnZn, NiZn working at high frequency 1mhz-1Ghz, MnZn working at low frequency 1khz-500khz, material permeability from 40-15000 with good impedance value.
  • Pot Core Ferrite
    DS core
    DS series MnZn transformer core are commonly used for CATV,LED transformer and various kinds of electronic instruments, etc.Suitable for the planarization of transformers.It has Low Loss and High Frequency.
More introduction

Technical Parameters

图片3

SPECIFICATION OF MATERIAL R5K、R7K、R10K、R12K and R15K

Symbol

Initial  

Permeability

(μi+/-20%)

Relative loss factor

(Tanδ/μix10-6

Relative Temperature Coefficienαμiγ(×10-6/°C)

Saturation Magnetic Flux DensityBs (MT)

Curie Temperature

TC(°C)

Electrical Resistivity

Ρ(Ω.m)

Density

D(g/cm3)

R5K

5000

≤6.5

-0.5-0.2

420

>130

1

4.8

R7K

7000

≤6.5

-0.5-0.2

420

>130

0.3

4.8

R10K

10000

≤7

-0.5-1.5

400

>120

0.15

4.9

R12K

12000

≤7

-0.5-3.0

360

>120

0.15

4.9

R15K

15000

≤7

-0.5-0.2

360

>110

0.15

5.0

 

Applications

MnZn Transformer core have a wide range of applications as follows:

1. Transformer/filter components in computer network cards.

2. Various audio transformers used in communication equipment such as program-controlled switches, usually adopting EP type high magnetic permeability core, which is 10000—12000.

3. Broadband transformers, including wideband signal transformers and pulse transformers, are indispensable for digital signals or analog signals to be transmitted in a wideband digital network.

4. Electromagnetic compatibility technology calls for the development of high-performance anti-EMI components.

That is mainly used for small broadband transformers, pulse transformers, micro inductors, and low frequency transformers. It can also be used as a normal mode and common mode choke coil and small filter. EMI components, heads and antenna rods can be fabricated.etc.

 

Pricing Guide

MnZn transformer core produced with different raw material with different price, that based on the different permeability, we can produce with different materials according to customer’s requirements.

 

Buying Guide

1. Consult:

We will recommend customer provide the size, include the out diameter, inner diameter, and height, and the impedance value requirement, material, quantity, also the drawing of the products if customer require customized.

2. Quotation:

We will offer you with our detail quotation according to the consulted information, Quotation commonly include EXW,FOB,CIF,CRF.

3. Process Evaluation:

All technical information will be sent to our engineer team for evaluating, if necessary make samples for testing  to get the exact product to match customer’s, that keep sure the price is reasonable, as closer as possible to match customer’s target price.

4. Placing Order:

If you have no doubt, we will send you the PI (Proforma Invoice) or contract to confirm the order information.

5. Production:

After receive the confirmed PI or contract, we will arrange production schedule, and update the process if customer required.(quality management as ISO9001:2015)

6. Inspection:

QC will arrange random inspection for every batch products, also accept full inspection as customer’s requirements.

7. Delivery:

We will arrange the delivery as the terms in contract after the confirmation by the buyer.

8. Custom Clearance:

We will supply and deliver all the necessary shipping documents to the buyer and ensure a smooth customs clearance.

9. Support and Service:

We will offer professional technical support and 24/7 free service by:

Phone, Email, Skype, WhatsApp, Online Live Chat, Remote Service.

We also have door-to-door service in some areas.

 

Manufacturer Guide

Careful magnetism & Electron Group is a technically leading corporation,integrates with production,management,research development and information service.It was assessed  as”high and new thchnology enterprise in ZheJiang province”.It has more than 30 years experience in producing soft ferrite core.The group started to run import and export business,more than 50% products are exported to Korea,southeast Asia,the USA,European countries and regions,etc.They are widly used in IT and interlligence Electric appliances series,sucn as IBM,DELL,AOC,PHILIPS,DAWOO,Haier and other international corporation which spread all over the world.

 

Material Description

MnZn material are including R5K,R7K,R10K,R12K,R15K. The permeability are 5000,7000,10000,12000,15000.They are used in the frequency range of 1 kHz to 10 MHz.

 

Product Comparison

I ferrite ocre can be used for antenna rods

toroidal Ferrite core can be used for common mode choke coil

EE type ferrite core can be used for For signal transmission

EC type ferrite core can be used For power conversion

Any way,different type used for different application.

Frend links:  Magnet, electroplating power supply
NAVIGATION
ABOUT US
NEWS
ENVIRONMENT
CONTACTUS
CATEGORY
  Amorphous core
  EMI suppression ferrite core
  MnZn transformer Core
Copyright © 2020 Huzhou Careful Magnetism & Electron Group. All rights reserved.