Welcome To Huzhou Careful Magnetism & Electron Group

Automotive

We are offering an extensive selection of high-density, high-reliability, high-temperature for the automotive industry. Our products will help to improve the performance and reliability of the vehicle's electrical systems such as LED LIGHTING, EV CHARGER, CAN BUS, HEAD UP DISPLAY, ENGINE IGNITION SYSTEM, etc.

Our Products

  • RH Core
    Tube core
    RH series emi suppression ferrite bead tube core commonly used for round cable for wire winding to get the anti-interference efficiency at high working frequency for application, especially at 1MHZ-500MHZ is the best condition, to fitted cable diameter from 1mm to 20mm.
  • Toroidal Coil
    Toroidal coil produced with toroidal ferrite core, material MnZn, Iron Powder, Amorphous and Nano-crystalline, used for CMC, filter, power inductor for electronic components.
  • Rod Core
    Rod core
    R type ferrite core, is a rod shape Nickel Zinc or Manganese Zinc soft ferrite, commonly used for coils after winding with excellent withstand voltage and current,Rod coil inductor in igniter, carbon brush, audio antenna, wireless antenna widely used.
  • Toroidal Ferrite Core
    Toroid&Ring core
    Emi NiZn(Nickel Zinc) toroidal core ferrites is a very popular component for the electric application, This sintered soft magnetic ring core widely used for power,digital,HDMI cables,filter inductors,RF transformers,the advantage is high working frequency,high impedance to compared with other soft ferrites,that also get good results in Anti-interference.
  • Rod Coil
    Ferrite rod coil winding with NiZn ferrite rod core, with high current and high voltage withstand, >1200V,windely used in ignition device,antenna coil,filters.
  • T Core
    T core
    T series MnZn transformer core are commonly used for Pulse and wide-band transformers, various types of filters, inductors and chokes etc. It is a polycrystal, sintered material with high electrical resistivity. The high resistance of ferrite makes eddy current losses extremely low at high frequencies.
  • UY Core
    UY  core
    UY series MnZn transformer core are commonly used for high current transformer, power switch transformer, common mode choke,induction cooker plate coils, Heater coils,high current transformer, advantage is high permeability, low core loss factor i
  • SCRC Clamp Core
    Emi ferrite high frequency nizn split core, used for cable signal noise suppression, widely used for electrical components, working frequency from IMHZ-1GHZ with good effective.
  • Split Core
    Split core
    SCT&SCH ferrite is a series of split EMI core, commonly used with plastic clamp case covered,it is a main product for the power cable and harness assemble. It is convenient to get the wire through it, and open it.Material is NiZn(Nickel Znic) and MnZn(Manganese Znic),to have good in impedance from 1khz-1ghz.
  • I Core
    I core
    I series MnZn transformer core are commonly used for high current transformer, power switch transformer, common mode choke, high current transformer, etc. It is a polycrystal, sintered material with high electrical resistivity. The high resistance of ferrite makes eddy current losses extremely low at high frequencies. Therefore, unlike other magnetic components, ferrite can be used at considerably high frequencies.
  • E Core
    EE core
    EE series MnZn transformer core are commonly used for switching power supply,main power transformer and various kinds of electronic instruments, etc.
  • DnH Core
    DnH core
    Dnh emi ferrite core is a NiZn customized size product, it is a RH tube core but with more than 3 cables through the core to get better impedance in special application.
  • RM Core
    RM core
    RM series MnZn transformer core are commonly used for filters for applied in the linear filter,choke,pulse transformer,drive transformer and various kinds of inductors and transformers etc. It is a polycrystal, sintered material with high electrical resistivity.
  • RID Core
    Balun core
    Rid type emi NiZn and MnZn soft balun ferrite core is a common material for balun transformer,also used in round cables of CATV,MATV,IPTV. It can install on the wire directly. Big size Special used in water treatment system.
  • EP Core
    EP  core
    EP series MnZn transformer core are commonly used for various kinds of transformers , chokes and various kinds of electronic instruments, etc.
  • CF Core
    CF core
    CF emi nizn ferrite also is a customized product which used in special cables.
  • EPC Core
    EPC  core
    EPC series MnZn transformer core are commonly used for various kinds of transformers , chokes and various kinds of electronic instruments, etc. It is a polycrystal, sintered material with high electrical resistivity. The high resistance of ferrite makes eddy current losses extremely low at high frequencies.
  • PQ Core
    PQ core
    PQ series MnZn transformer core are commonly used for filters for applied in the linear filter,choke,pulse transformer,drive transformer and various kinds of inductors and transformers etc. It is a polycrystal, sintered material with high electrical resistivity.
  • FS core
    Flat core
    FS type ferrite core is a oval shape product, commonly used for flat digital cables for anti-jamming. Material is Nickel Znic, frequency cover 1mhz-1ghz, with best stable impedance at 1mhz-500mhz, curie temperature >160°C。
  • Toroid Nanocrystalline Core
    Iron nanocrystalline alloys consist of iron, silicon, boron, niobium and cuprum. The iron-based amorphous alloy containing Cu and Nb will form very fine grain structure when it is annealed above the crystallization temperature. The grain size is only 10-20 nanometers, and this amorphous alloy can form crystalline materials by special crystallization annealing which are called nanocrystalline alloys. Nanocrystalline materials have the excellent properties of high saturation magnetic induction intensity, high permeability, low coercivity, low loss and good stability, high toughness,wear and corrosion resistance, etc. Because the nanocrystalline materials has optimum performance and price in metal soft magnetic materials, it can replace silicon steel, premalloy and ferrites to be the ideal materials for middle and high frequency transformer, mutual inductor, inductance component.
Related Links:  Magnet, electroplating power supply
NAVIGATION
CATEGORY
Copyright © 2020 Huzhou Careful Magnetism & Electron Group. All rights reserved.